PTFE Bowden Tube Organizer Clip | by catchworks - Free 3D Print Model

Search models, users, collections, and posts

catchworks

3D Printer>3D Printer Parts

IP Report

Print Profile(1)

All

0.2mm layer, 3 walls, 15% infill

Designer

3.7 h

6 plates

4.8(32)

Open in Bambu Studio

Boost

225

753

773

352

Released

Description

A clean minimalistic PTFE/Bowden Tube Organizer clip for any printer.

Manage and organize your PTFE Tube with this minimalistic Clip.

Most Clips are too tight and damage the tubes. These ones are a perfect fit without being too tight.

Suitable for 2 up to 6 tubes
no support needed

Pro Tip for Bambu Lab A1: Use two 5-PTFE Clips above the hotend to guide the black cable. Then use two 4-PTFE Clips for the rest of the tubes (see example images). This is the cleanest and most minimalistic solution i've found.

Boost Me (for free)

give me a boost ❤️

a1 ptfe and extruder guide

Comment & Rating (35)

@StreetGlideZ71

Print Profile

0.2mm layer, 3 walls, 15% infill

After a few prints the tubes started to spread. These clean the tubes up nicely.

The profile uploader has replied

@catchworks

thanks for your images and the rating!

@TheDooley

Print Profile

0.2mm layer, 3 walls, 15% infill

Impeccable 👍

Show original

@k4hvf

Print Profile

0.2mm layer, 3 walls, 15% infill

Very nice print. Works great

@KageKaibutsu

Print Profile

0.2mm layer, 3 walls, 15% infill

Had to scale up 15% to fit

The profile uploader has replied

@catchworks

Then you‘re not using standard tubes. For everyone else here they worked perfectly.

@user_3097342126

Print Profile

0.2mm layer, 3 walls, 15% infill

Well designed and easy to print

@Bosun

Print Profile

0.2mm layer, 3 walls, 15% infill

good print; waiting on my AMS TO ARRIVE.

@Gamerman56561

Print Profile

0.2mm layer, 3 walls, 15% infill

Printed great :D

@user_3345477674

Boosted

Prints well

@asousa1

Print Profile

0.2mm layer, 3 walls, 15% infill

Not sure why but even using supertack plate i was facing issues to print it.

@xSolowJonel

Print Profile

0.2mm layer, 3 walls, 15% infill

Excellent print profile, they fit perfectly on the PTFE tubes🍺

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.