Treddigineer

cover

Foto.jpg

1.jpg

2.jpg

3_1_1.jpg

4_1.jpg

5_1.jpg

Print_1.jpg

Book Nook Version BOX

plate_1.png

Wall Mount Version BOX

plate_2.png

Print For all version

plate_3.png

22aa182939233366.jpg

0.2mm layer, 2 walls, 20% infill

MagnetDanny

gmail_images20260130_091836.png

gmail_images20260130_092037.png

gmail_images20260130_091952.png

gmail_images20260130_091728.png

gmail_images20260130_091709.png

gmail_images20260130_091413 (1).png

gmail_images20260130_091413.png

gmail_images20260130_090559.png

gmail_images20260130_090415.png

gmail_images20260130_090350.png

gmail_images20260130_090321.png

gmail_images20260130_090228.png

gmail_images20260130_090127.png

This profile scales the model to 80% in the slicer only so it fits the Bambu Lab A1 mini build plate. The original geometry is unchanged, fully respecting the creator’s license.<h3>Slicer &amp; Print Optimizations</h3><ul><li>Arachne wall generation for cleaner thin features and consistent wall thickness</li><li>Nearest seam placement to minimize visible seam artifacts on the face and fine details</li><li>15% Lightning infill to keep the model lightweight while maintaining strength where needed</li><li>Brim enabled for reliable bed adhesion on the A1 mini</li></ul><h3>Support Strategy (Boat &amp; Organic Details)</h3><ul><li>Custom tree supports tuned for thin, organic geometry</li><li>Increased Z separation and XY clearance for easy, clean support removal</li><li>Reduced branch diameter and increased branch spacing to avoid scarring delicate features</li><li>Detect thin lines and increased wall loops were required only for the boat section and for supports removal cleanly after printing.</li></ul><h3>Quality &amp; Reliability Tweaks</h3><ul><li>Bottom shell layers increased to 6</li><li>Top shell layers increased to 7 for a smoother finish</li><li>Outer wall, inner wall, and top surface speeds reduced to preserve small details</li><li>Initial layer speed reduced for improved first-layer adhesion and print reliability</li></ul><h3>Notes</h3><ul><li>Box and wall-mount parts print without supports</li><li>Designed to print cleanly on the A1 mini with standard PLA profiles</li></ul>

A1 mini – optimized print profile (80% scale)

aghaynes

PXL_20260418_084128632.jpg

wooden texture box. texture added with bumpmesh.com.

0.2mm layer, 2 walls, 15% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

Hi all&nbsp;This is a book nook horror inspired by Jaws&nbsp;You can find 3 plate &nbsp;The first one consists of 1 pieces , Book Nook Box&nbsp;The second one consist of 1 pieces, Wall Mount Box&nbsp;The thirt one consist of 3 pieces to be print for all version, (Bruce the shark, Orca boat and water/Sea)&nbsp;the dimension is approximately 11x10x21cm you can scale it as you wish&nbsp;To assemble, first insert the shark and glue it to the highest part of the niche, then insert the boat and the sea&nbsp;At the back there is a niche where you can place a weight to prevent the piece from falling forward&nbsp;enjoy&nbsp;If you wand more exclusive book nook or need a commercial license you can find me on Patreon, link in my bio &lt;3

Jaws Book Nook and Wall Mount

ASIA

Print Profile(3)

Description

Comment & Rating (51)

License

Related Models