XT60 to 65W usb - c charger (neo 2)

I loved the 100w usb C charger by user Silver.  When i ordered the parts to build his I also ordered a smaller 65W usb c charging board.  So I drew up a small housing for it, still has the voltage display.  You need to CUT OFF the little screw legs on the display carefully, then sand them or use a hobby knife until it's flush because it's a TIGHT fit.

the board

https://www.aliexpress.us/item/3256806830457021.html?spm=a2g0o.order_list.order_list_main.23.78b81802jauSYB&gatewayAdapt=glo2usa

xt 60 meant for standoffs (the standoff part is not used but prevents the xt60 from moving around):

https://uavgarage.com/shop/xt60-5mm-mounting-post-hole-5pcs/

https://hobbyking.com/en_us/xt60-male-with-mounting-bracket.html

https://ebay.us/m/RNOtJ8

voltage display (cut the small pcb screw legs off carefully!):

https://www.aliexpress.us/item/3256810301119944.html?spm=a2g0o.productlist.main.26.48f455ebegQhqV&algo_pvid=c0f0b573-5c5c-4f46-82bf-66d2e7f03fc5

4 m2x5 (m2x4 will work also) screws.  You will have to self-tap into the base.

2026 Jan 26: I updated the model to be a bit “looser” where the display goes.  I built a 2nd one and the display is a tiny bit larger.