Leatherman - Flat bit and ratchet holder
Print Profile(1)
Description
I wanted to carry my flat bits and ratchet with me, but all the solutions I found were too bulky, so I came up with this design. It is inspired by the ULDESIGN "Ultra Compact Flat Bit Holder" and the ratchet holder found on the Leatherman Arc holster by V2arK.
It carries 20 bits plus 2 small bits, all held in place by five 6x2x20mm magnets. I chose to print the exterior with "fuzzy skin" for better grip and to hide unwanted lines caused by the geometry.
I also designed a custom support for the lid so that it can be printed at the same angle as the holder.
Printed in Elegoo PLA CF.
This remix is based on
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (5)