Search models, users, collections, and posts
Throttle Valve Intermediate Piece 100 mm Pipe
IP Report
Print Profile(1)
0.2mm layer, 3 walls, 15% infill
Designer
4.5 h
1 plate
Open in Bambu Studio
Boost
11
25
0
0
21
5
Released
Bill of Materials
List other parts
- Schraube x 2: M3x12
- Einschmelz Gewindehülse x 1: M6
- Rändelschraube/Feststellschraube x 1: M6
Description
Content has been automatically translated.
Throttle valve intermediate piece for 100 mm extraction pipe.
As an intermediate piece to the already published 90-degree elbow.
Top 100 mm inner diameter
Bottom 10 mm outer diameter
The pins are inserted from both sides inwards and fixed with small screws in the flap itself.
The flap can be inserted into the pipe from below.
There is a groove on the adjustment wheel for a set screw.
A hole is prepared in the pipe for an M6 threaded insert. Melt this in.
This way, the flap can be locked in the desired position.
License
This user content is licensed under a
Creative Commons Attribution
Comment & Rating (0)