Akemi - Blue Eye Samurai

Akemi from Blue Eye Samurai series on Netflix.

Be sure to share your prints or tips!  Learning how to use hueforge.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 136.32x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.06603mm

    #002043 PLA+ IIID Max Navy Blue  Transmission Distance: 3.6
    #4c5f71 PLA BambuLab Basic Blue Gray  Transmission Distance: 3
    #eb3b41 PLA Overture Matte Red  Transmission Distance: 2.5
    #ddd7c7 PLA+ Esun Bone White  Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Navy Blue
    At layer #8 (0.72mm) swap to Blue Gray
    At layer #10 (0.88mm) swap to Red
    At layer #11 (0.96mm) swap to Navy Blue
    At layer #15 (1.28mm) swap to Bone White for the rest.