Oil Drain Stand for DELONGHI PremiumFry Deep Fryer

To change the cold oil in my DELONGHI PremiumFry F44510, I always had to place the device on an edge

and hold the bottles under the drain tap for minutes to store or change the oil.

That's why I designed and printed this simple two-part holder in the slicer.

It requires no supports or special settings.

The assembly is actually self-explanatory:

Simply print the two print beds, connect the cylinders in the middle,

so that the struts are at the bottom and top, with the holes facing up

and with the recessed strut facing down and forward. (Where the oil bottles are placed.)

Then place the deep fryer with its feet into the holes so it cannot slip.

All parts can still be adjusted if your model has device feet that go into the stand tubes

are attached somewhat differently, or if the height needs to be adjusted for other containers.

For me, everything fits together perfectly, stands securely, and serves its purpose exactly.

The print just fit on a P1S print bed.