Gridfinity SMD Bin 1x1 - 1-3U - 2-6 Compartments + Label

Simple Gridfinity bins in size 1x1 1-3 HE, divided into several individual compartments (1-6), each with a labeling area. Suitable for storing small SMD components. The bins are stackable to optimally utilize space. 4 magnets 6mm x 2mm can be glued in. Additionally, a 1x1 lid (dust cover), a small lid for the 6-compartment bins, and a funnel for filling are included
 

The following bin sizes are included:

Print plate 1: 1x1 - 1HE - 6 compartments - 11.73g PLA per bin

Print plate 2: 1x1 - 1HE - 4 compartments - 11.48g PLA per bin
Print plate 3: 1x1 - 1HE - 3 compartments - 10.88g PLA per bin

Print plate 4: 1x1 - 1HE - 2 compartments - 10.61g PLA per bin

Print plate 5: 1x1 - 1HE - 1 compartment - 10.34g PLA per bin

Print plate 6: 1x1 - 2HE - 6 compartments - 14.95g PLA per bin
Print plate 7: 1x1 - 2HE - 4 compartments - 14.44g PLA per bin
Print plate 8: 1x1 - 2HE - 2 compartments - 13.32g PLA per bin

Print plate 9: 1x1 - 2HE - 1 compartment - 11.79g PLA per bin
Print plate 10: 1x1 - 3HE - 2 compartments - 16.02g PLA per bin

Print plate 11: 1x1 - 3HE - 1 compartment - 15.23g PLA per bin

Print plate 12: 1x1 - Lid - 5.17g PLA per lid

Print plate 13: SMD funnel for 6-compartment bin - 5.85g PLA

Print plate 14: Lid for single compartment of the 6-compartment bin - 0.53g PLA per lid

Lids for individual compartments and lids for the entire bin cannot be combined. The lid for individual compartments has a 45-degree chamfer that slides under the label bar for better hold. It is a bit difficult to use but generally holds well in the compartment.

Own CAD design (Onshape), Gridfinity compatible (grid + stackability tested with third-party bins).

Dimensions 41.5mm x 41.5mm x 18.4mm(1HE), 25.4mm(2HE), 32.4mm(3HE) / Outer walls 1.8mm / Inner walls 0.8mm / Labeling area 6.5mm x 12.1mm / Usable depth of the individual compartments 7.5mm(1HE), 14.5mm(2HE), 21.5mm(3HE)

Two stacked 1HE bins are the same height as one 3HE bin