MountOne | Printed Equatorial Tripod STL Set.

The MountOne Printed Equatorial Tripod (PET).

The PET features adjustable legs, an integrated spirit level, and polar alignment for latitudes between 30-90°.

Adjusters at the top of the legs level the tripod, referencing a spirit level in the base. The upper section of the PET can be tilted back 60° and locked in place using a securing clamp.

The MountOne is powered via cables running through the PET. A standard DC Jack resides at the back of the PET, between the left & right legs, feeding 24V power into the MountOne.

The PET Can be folded back up at the end of your session, or leave the MountOne attached and move it as a single unit. 

Full details on the MountOne Blog Post.

The MountOne PET STL Set includes basic STLs and calibration prints.

The PET Hardware Kit includes the following parts.

• 1 x 32mm Spirit Level.
• 3 x 80mm Long, 8mm Diameter Bars.
• 1 x M8 90mm Hex Bolt.
• 7 x M8 Rivnuts.
• 1 x M8 Nylon Washer.
• 6 x M8 Rubber Feet.
• 1 x DC Female Sockets
• 1 x DC Male Plugs.
• 20 x M5 20mm Screws for Plastic.

The Hardware Kit also includes The PET CAD Pack.

The PET CAD Pack contains all digital resources for the MountOne PET.

• STEP Files, including the Main Assembly.
• STL Files, full sets with all calibration sizes.
• F3Z Fusion Files, the fully-editable Master Assembly.
• PDF Files, Bill-Of-Materials with Fixings & Printed Parts.
• 3MF Files, for Bambu Lab P2S, X1C & A1 Mini.

Complete documentation, including printing and assembly guides, is available online

MountOne Documentation.

Version History.

09/04/2026 | First Release.