The Office | Coaster

I’m a big fan of the show and I wanted to make something for our home. These are my first designs and I’m still learning, so any feedback or suggestions are more than welcome! If you decide to print it, I’d love to see your result.

Technical Details:

Nozzle: I used a 0.2mm nozzle to make sure the fine details come out as clean as possible. It can probably be printed with a 0.4mm nozzle, but I haven't tested it myself; I recommend checking the slicer preview first.

• Printer: The one in the photo was printed on a Bambu Lab A1.
• Material: Printed in PLA Matte Charcoal / Ivory White.
• Orientation: I recommend printing this face down (top side touching the build plate) to get that nice texture from your plate on the front of the coaster.
• Dimensions: 95mm diameter and 2.5mm thickness.

Matching Holder:

I have a Coaster Holder in my profile that fits this one or any other coaster I've uploaded. You can find it here.

Legal Disclaimer:

This is a non-official fan project. I do not own the rights to "The Office". This model is shared for free, for personal use, and without any profit motive.