Print Profile(2)
Description
Lightbox in Harley Davidson Style
Further versions of the Harley lamps:
If you have printed the box, you can also just print the HueForge and simply swap it out
HueForge Settings:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 160x100mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2mm
#ffffff PLA Bambulab Basic Jade White Transmission Distance: 5
#fce300 PLA Bambulab Basic Yellow Transmission Distance: 6
#c00d1e PLA Bambulab Basic Red Transmission Distance: 4
#000000 PLA Bambulab Basic Black Transmission Distance: 0.6
This print uses 4 unique filaments
Swap Instructions:
Start with Jade White
At layer #13 (1.12mm) swap to Yellow
At layer #20 (1.68mm) swap to Red
At layer #23 (1.92mm) swap to Black for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)