2020-2025 Hyundai Palisade AutoStop Button Disable - Free 3D Print Model

Search models, users, collections, and posts

Panicked_Dude

Hobby & DIY>Vehicles

IP Report

Print Profile(1)

All

P1S

P2S

H2C

X1 Carbon

P1P

X1E

H2D Pro

H2D

H2S

A1 mini

X2D

A2L

0.08mm layer, 2 walls, 15% infill

Designer

12 min

1 plate

4.8(13)

Open in Bambu Studio

Boost

236

180

126

Released

Description

Print, insert next to button, and forget it! Slide this little print next to the auto-stop/start button so that it is lit up when depressed. It will stay depressed and turn off the auto-stop "feature" automatically, every time you start the car. Includes an overhang tab so it doesn't slide all the way down into the button and helps to remove it if you want the option to use the "feature" again. Beats buying a $99 wiring harness to do the same thing!

Would recommend PETG but PLA should be fine.

Comment & Rating (27)

@wjshaw

Print Profile

0.08mm layer, 2 walls, 15% infill

This is a great product. One of the reviews mentioned that it can’t be used on the higher trims because of the camera button. I experience that same thing because it keeps you from pressing the camera button. So I just went to the other side and put the device in, which worked great. The only problem was the original design was too long for the other side, so I made it 18mm long instead and it now works perfectly!

@Chiefs_Kingdom

Can you upload the file?

(Edited)

@wjshaw

Replying to @Chiefs_Kingdom :

I could, but honestly it's so easy to do. Download the original file, select it in Bambu Lab and press the S key, which will bring up the Scale menu. Then simply change the length to 18mm.

(Edited)

@Chiefs_Kingdom

I don’t have Bambu studio or any other app. I only have Bambu Handy, so please upload the file?

@ga1205

Unfortunately, this doesn’t work for higher trim models that have a camera button because the thickness of the plate also keeps that button pressed down.

@wjshaw

I experience that same thing because it keeps you from pressing the camera button. So I just went to the other side and put the device in, which worked great. The only problem was the original design was too long for the other side, so I made it 18mm long instead and it now works perfectly!

@TONYD0808

Print Profile

0.08mm layer, 2 walls, 15% infill

@user_1964473992

heck ya!! I saw you post this on 3D printed car parts!

@nkroberts12

Boosted

Print Profile

0.08mm layer, 2 walls, 15% infill

Nothing I've printed has made my wife happier than having her Auto ON/OFF disabled. Great model!

@royriffel

Print Profile

0.08mm layer, 2 walls, 15% infill

exactly what I needed! thank you!

@Walletclan

Print Profile

0.08mm layer, 2 walls, 15% infill

Such a simple design that solves a big issues. I hate auto stop! Printed this for my wife's Kia Sorento. Works like a charm! Printed in Polymaker PETG.