Elma - Xenoblade X - ChromaLink - Free 3D Print Model

Search models, users, collections, and posts

Remixed by

KnoppersDE

Generative 3D Model>Hueforge & Lithophane

IP Report

Print Profile(1)

All

X1 Carbon

H2D Pro

P2S

H2D

X1E

P1S

H2S

P1P

H2C

X2D

A2L

0.08mm layer, 1 walls, 100% infill

Designer

5.4 h

1 plate

Open in Bambu Studio

Boost

Released

Bill of Materials

Bambu Filaments

Select all

Description

ChromaLink Hex Wallart for Xenoblade Chronicles Character Elma

Below are the default Hueforge instructions, add 18 layers to the swap instruction as the ChromaLink base is 18 layers high.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 216.96x250mm in size

You may print at higher layer heights below the Base Thickness of 0.08mm
The Max allowed Thickness is 1.84mm and the Actual Thickness is 1.84mm

    #000000 PLA BambuLab Basic Black Transmission Distance: 0.6
    #950051 PLA BambuLab Matte Plum Transmission Distance: 1.6
    #f99963 PLA BambuLab Matte Mandarin Orange Transmission Distance: 3
    #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #6 (0.56mm) swap to Plum
    At layer #11 (0.96mm) swap to Mandarin Orange
    At layer #15 (1.28mm) swap to Jade White for the rest.