HAAS F1 VF-26 2026 FRONT WING 1/8 SCALE + STICKERS

⚠️ PLEASE READ BEFORE PRINTING ⚠️

• Download via Web: Please download the files from the web version of MakerWorld. Printing directly from Bambu Handy might lead to different settings that could affect the final result.
• Intricate Design: This model has passed my printing tests (see photos). Due to its complex structure, I recommend novice users not to alter the print profiles to avoid failures.
• Support & Feedback: Print quality depends on your gear and filament. If you encounter issues, please message me for troubleshooting before leaving a negative review. Content creation is hard work—let's communicate first!.

• 

The Project This model is entirely designed in Fusion 360 and optimized for 3D printing, even for smaller beds like the A1 Mini. The wing prints in one piece, and I’ve engineered the supports to "pop off" as easily as possible, preserving the thin aerodynamic surfaces.

What’s Included?

• 1/8 Scale Model: A precise replica of the Haas VF-26 front wing.
• Sticker Sheet: A high-resolution A4 PDF with all the team decals, perfectly sized for the 1/8 scale.

Post-Processing 

To achieve the result shown in my photos, expect about 3/4 days of  work:

1. Sanding: Smooth the print with sandpaper (80 grit up to 500+).
2. Primer: Apply a plastic-safe primer layer.
3. Paint: Use acrylic spray paint for the team colors.

4. Decals & Protection: Apply the included decals and finish with a clear coat for that shine.

   

Note: This is an unofficial, fan-made design for hobby purposes, not affiliated with Formula 1, HAAS F1 Team, or their sponsors.