AMS / AMS 2 Pro Silica Box with Hygrometer

PRECISE DESIGN & PERFECT FIT
This silica box for the Bambu Lab AMS is a completely new design focused on accuracy, stability, and everyday usability.
The original Bambu Lab hygrometer fits perfectly and without any play into the integrated slot.
Thanks to intentionally tight tolerances, both the hygrometer and the sliding lid remain securely in place, preventing unintentional opening

FUNCTION & MEASUREMENT ACCURACY
A disassembly hole on the back allows for easy and damage-free removal of the hygrometer.
At the same time, it measures humidity directly in the AMS through this opening.
The silica box forms a separate chamber, which results in realistic and unaltered readings

COMPATIBILITY
The box not only fits the H2 series AMS, but is also compatible with:
P1P, P1S, X1, X2D, H2S, H2C and H2D

PRINT TIME & MATERIAL
Print time: approx 2 hours 10 minutes
Material usage: approx 92 g filament

For AMS 1 → PLA recommended
For AMS 2 Pro → PETG recommended (higher drying temperatures)

The structured front ensures even air circulation and optimal moisture absorption

DESIGN
The conscious choice of white creates a clear contrast to the dark AMS and perfectly matches the design language of the Bambu Lab H2 series.
Thus, the box integrates functionally and visually harmoniously into the system

PRINT SETTINGS & TIPS
For best results:

• Clean build plate
• Use 3D varnish or glue (against warping)

Due to the tight tolerances, calibration of flow and dimensional accuracy is recommended if the fit is not immediately perfect