Saphe T Visor
Print Profile(1)
Description
Boost Me (for free)
Support my work by giving this model a Boost :)
This is a visor for the Saphe T traffic alarm.
it is mounted using a ring magnet, that has a 12mm outer diameter, 8,5mm hole (1,75 wall) and 4mm thick.
The magnet is installed during the print, the print will pause at a certain time, here you will have to place the magnet, and hit Resume print afterwards. (remember to place the magnet right side down)
The one i used is bought in Bauhaus, and can be found HERE, another magnet with same measuements can also be used.
The visor can be used with the original mounts that comes with the Saphe T,
or you can print the Flexi Arm that the visor is designed to fit. (Click the image below to find the Flexi Arm)
There are 5 plates, one for each overhang length (10, 15, 20, 25, 30 mm) - Print the one you prefer.
Membership
If you want to support my work futher, or maybe use my designs commercially, please join one of my memberships.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (5)