Stark's Axe (Frieren) - Free 3D Print Model

Search models, users, collections, and posts

Tyron_Makes_Stuff

Props & Cosplays>Cosplay Weapons

IP Report

Print Profile(1)

All

H2S

P2S

H2D

H2D Pro

H2C

X2D

A2L

0.2mm layer, 2 walls, 10% infill

Designer

23.8 h

6 plates

5.0(2)

Open in Bambu Studio

Boost

107

351

188

Released

Description

Wanted Stark's axe. Made Stark's axe :)

I am aware that the handle does seem a little thin, I originally wanted to wrap the handle in black leather, but could not find a source near me so i just left it as that.

Warning:

Filling, Priming and sanding is required prior to painting for a good finish.
Masking and painting is required. Model is not split by colour.

Before Printing Reccomendations:

Supertack Plate is used in the 3mf file as I was worried about corners lifting and warping.
Additional brims are reccomended if using other plates (untested)
Full assembly (besides the metal pipe) is reccomended before filling priming and sanding.

Bill of materials:

155cm long 16mm outer diameter Metal Pipe (Handle)
- The maximum outer pipe diameter is 16.4mm (including tolerances added)
Black & Silver Spray Paint
Spray Filler / Bondo
Cyanoacrylate/super glue (my preferred assembly method for 3d prints)
Sandpaper :)

Total Stats:

161cm (Adjustable by cutting the metal pipe to a custom length)
~870g of filament used

Assembly:

Should be pretty straight forward by looking at the photos.
I've attached the configuration of the blade parts below

Boost Me (for free)

I make free files for the love of making, Boosting is much appreciated (and it's free)

Membership

Commercial Licenses available. (If you're making a one-off commission, you don't need this)

Join

Comment & Rating (6)

@scribbs

Print Profile

0.2mm layer, 2 walls, 10% infill

P1S is available but u have to edit it in bambu studio,. It's a really good model but the 16 mm outer diameter may be hard to find

(Edited)

@user_2526168890

Hello, Your project is quite good, wouldn't it be possible to create a handle in several parts that could be connected like Frieren's staff created by another person? Do you think that if we print it directly in the right colors, sanding would be necessary? Thank you and congratulations on your work

The designer has replied

Show original

@user_628671829

Thanks for the suggestions but, I was afraid that if the handle was printed it wouldn't be strong enough to swing around, and reinforcing it with a metal pipe seemed redundant lol. Printing by colour wise, im sure it could be done, but you'd need to split the axe head into more pieces or do multicolour printing which would be kind of wasteful. Unfortunately I'm not planning to update the model as this was just a one off project for fun :)

@tdbflix

Hey, great Model, I really wanted to ask if you could design more items for your Minecraft Armor Stand Model? A lot of people requested that and would really love to see that

@scribbs

How do I print this on a P1S

@user_3638307118

Print Profile

0.2mm layer, 2 walls, 10% infill

No more

License

If you want to use this model commercially, please join my membership.

Join Now

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Frieren's Purr Meow - Frieren

Gatto

5.2 k

1.7 k

Frieren: Beyond Journey's End

AtamiSquare

4.3 k

2.1 k

Sitting Frieren Reading - (Sousou no Frieren)

Lynns

2 k

1.1 k

Dummy 13 Axe

Chubb_y

4.7 k

2.1 k