Essential glue workstation for 3D printing model assembly: a glue dispensing platform, glue application tools, a specialized "cheese" workstation for spreading glue during assembly, a glue spatula, a storage box, a mat, and small glue applicator sticks for bonding small parts

I designed a workstation model for myself, mainly to make gluing easier. When gluing small objects, you can't just apply glue directly to the model; you need to find something to dab the glue with a toothpick. To suit my own habits, I specifically designed this item. You can use the glue applicator stick model or a toothpick to dab the glue and then attach very small parts

The three boxes of different heights at the back can store scrapers, glue, glue applicator sticks, toothpicks, and other sundries, respectively. The two large arcs in the middle are for holding liquid glue for dipping. The arc shape was chosen because it's easier to see and prevents too much glue from sticking to the vertical walls, making it less likely to dry out quickly. There are also several holes of different sizes in the middle, also for dispensing liquid glue. The flat platform is shaped like cheese, and the holes on the edges of the cheese allow glue applicator sticks and toothpicks to be temporarily placed diagonally, preventing them from slipping off the edge. There are three raised holes of different sizes on both the left and right sides for vertically inserting glue applicator sticks or toothpicks. Additionally, I designed 6 glue applicator sticks, mainly divided into 3 flat-headed ones of different sizes and 3 round-headed ones of different sizes. All glue applicator sticks are thicker at one end and thinner at the other, making them double-sided and very convenient for gluing small parts. Choose which one to use based on the size of the model part. Toothpicks can also be used as an alternative. There is also a desk mat included to prevent glue from dropping onto the table, which can be scaled according to your needs