Brennenstuhl Power Strip Opengrid Mount

Opengrid Multipoint mount for a Brennenstuhl Premium-Line Power Strip. The powerstrip model I have can be found here for reference.

I had such trouble getting onboarded into Opengrid myself so here's some (hopefully) simple instructions:

1. Print out an opengrid and mount it to your surface, be it underneath a workbench or on the wall.
2. Print out the Multipoint compatible snaps (see picture below)
3. Press three snap frames into the grid (three in a row)
4. Attach the screw to each of them using a flathead screwdriver. No need to tighten very much at all.
5. Mount the power strip on the mounts
6. Slide the mounts onto the screws

For those making their own accessories. Heads up, the base plates of multipoint differs between Opengrid and Mutliboard baseplates. This model is not compatible with Multiboard Multipoint grids.