Mickey Heart Hands Slider + Flip Fidget

Thank you for your support! If you like our family's designs - you can sell the physical prints through a paid Patreon membership: 

https://www.patreon.com/c/SpacedOutStudio

Let this fully cool after print (you can remove from the build plate) and rotate the hinges – NOT the pin – and then press the pin between your fingers to break the supports (don’t twist the pin – see image below). If you have filament and settings dialed in you can also gently twist the pin until you feel a little resistance, then twist the other way gently until it fully loosens. The hinges should move just fine. The more you play with it, the more it will loosen. PLA will work great. Some filaments will allow movement right after the print.  If you have issues, please contact me and happy to help. 

Mickey Heart Hands Slider + Flip Fidget

These iconic white gloves are busy doing what they do best—holding a heart and keeping your hands occupied. This Mickey Mouse inspired heart hands fidget is endlessly satisfying: flip it, slide it, twist it, or let it slip through your fingers. It’s smooth, tactile, and weirdly hard to put down (don’t say we didn’t warn you).

There are two versions with different hand poses, and each one prints front and back in two colors for extra pop. The heart stays center stage while the hands do all the motion magic. It prints in just over an hour, and if you stack a few on a plate… well, efficiency is love too.