Print Profile(0)
Description
Project: Gachiakuta Characters 1
*Use a high TD WHITE
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.48mm and the Actual Thickness is 2.48mm
Filaments Used: (* = Owned)
#f4c032 PLA Polysonic Yellow Transmission Distance: 5.6
#080a0d PLA PolyLite Black Transmission Distance: 0.3
#ffffff PLA Paramount 3D White Transmission Distance: 12
This print uses 3 unique filaments
Swap Instructions:
Start with Polysonic Yellow
At layer #5 (0.48mm) swap to PolyLite Black
At layer #7 (0.64mm) swap to Paramount 3D White
At layer #25 (2.08mm) swap to Polysonic Yellow for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)