Pokemon Glaceon
Print Profile(1)
Description
Filaments Used:
- PLA BambuLab Basic Black
- PLA BambuLab Basic Cyan
- PLA BambuLab Matte Ice Blue
- PLA BambuLab Basic Jade White
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Cyan
At layer #13 (1.12mm) swap to Ice Blue
At layer #20 (1.68mm) swap to Jade White for the rest.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 112.54x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.92399mm
Remember, if scaling is desired, modify only the x and y axes; the z-axis must remain unchanged.
Boost Me (for free)
Do you like my model?
Then I would be very grateful for your support with a free boost token. Thank you very much
Gefällt Ihnen mein Modell?
Dann würde ich mich über eine Unterstützung mit einem kostenlosen Boost-Token sehr freuen. Vielen Dank
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (4)