Adriiibtt

cover

ndia.png

CHROMA

plate_1.png

ada294d1d8cd392a.png

<h3>⚙️ Ajustes de impresión</h3>El modelo ha sido impreso y probado con los siguientes parámetros:<ul><li>Altura de capa: 0,20 mm</li><li>Boquilla: 0,4 mm</li></ul><h3>🎨 Materiales y colores utilizados</h3>Se han utilizado los siguientes filamentos durante la impresión:<ul><li>Negro – Bambu Lab Basic</li><li>Gris – Bambu Lab Basic</li><li>Blanco – Smart Materials</li><li>Dorado (Gold) – Smart Materials</li></ul>Estos ajustes y materiales garantizan un equilibrio óptimo entre calidad, resistencia y tiempo de impresión. Se recomienda mantener los mismos parámetros para obtener resultados iguales o muy similares al modelo original.

<h3>⚙️ Print Settings</h3>The model has been printed and tested with the following parameters:<ul><li>Layer height: 0.20 mm</li><li>Nozzle: 0.4 mm</li></ul><h3>🎨 Materials and Colors Used</h3>The following filaments were used during printing:<ul><li>Black – Bambu Lab Basic</li><li>Gray – Bambu Lab Basic</li><li>White – Smart Materials</li><li>Gold – Smart Materials</li></ul>These settings and materials ensure an optimal balance between quality, strength, and print time. It is recommended to maintain the same parameters to obtain results identical or very similar to the original model.

0.2mm layer, 2 walls, 15% infill

You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.

This user content is licensed under the MakerWorld Exclusive License.

<h3>📌 Descripción del modelo</h3>Este modelo 3MF incluye el perfil de impresión completamente configurado, con todos los ajustes optimizados para obtener el mejor resultado posible. No es necesario modificar los parámetros de impresión: simplemente cargue el archivo e imprímalo.⚠️ Advertencia importante sobre el escalado Si necesita cambiar el tamaño del modelo, solo escale en los ejes X e Y. 👉 No modifique la escala en el eje Z, ya que la altura está calculada con precisión y alterarla puede afectar negativamente al resultado final de la impresión.Respetando estas indicaciones, el modelo se imprimirá correctamente y con la calidad prevista.

<h3>📌 Model Description</h3>This 3MF model includes the fully configured print profile, with all settings optimized to get the best possible result. There is no need to modify the print parameters: simply load the file and print it.⚠️ Important Scaling Warning If you need to change the size of the model, only scale along the X and Y axes. 👉 Do not modify the scale on the Z axis, as the height is precisely calculated and altering it can negatively affect the final print result.By following these instructions, the model will print correctly and with the intended quality.

Print Profile(1)

Description

📌 Model Description

Comment & Rating (0)

License