Flawless Appearance - Slime Fluid Pull-Strip Fidget Toy - Sphere

Slime Ball Twisty Fidget Toy

1. The bottom is reinforced with small circular pads for a perfect appearance and no supports needed
   1. Easily remove after printing If white marks remain, quickly scorch them with a lighter flame
2. The build plate must be clean; glue is optional
3. Variable layer height is not used by default, even though the top appearance would look better
   1. This reduces the risk of the nozzle scraping the model and lowers the failure rate
4. 70mm diameter, robust structure
5. The print profile has been optimized for time-saving and strength
6. For those who prefer quieter operation, simply revert the strength and line width parameters to default
   1. This reduces 'noise' generated by cavities
   2. Significantly increases print time

A print profile for aesthetic filaments such as PLA Silk, named 'PLA Silk Version', has been added (Removed)

• Modified the 'X-Y Contour Compensation' parameter to -0.03 to increase the fitting clearance
  • Printed and tested, smooth and jam-free

Update 2026-2-18

1. Redesigned the shape of the sliders within the tracks
   1. The new sliders print without overhangs, preventing nozzle scraping
2. Added connecting surfaces between the tracks of some components
   1. This ensures these components remain stable during printing Previously, they were prone to shaking, causing issues
3. Removed the previous'PLA Silk Version' print profile, as the fitting clearance has been modified to accommodate all filaments
   1. The only difference in the PETG print profile is that the reinforced bottom uses a ring instead of a solid circular pad; this is because PETG filament is harder to clean from crevices, so only the outer ring is reinforced

Now available:Twisty Fidget Toys Collection 👈 Click here for direct access