Cars Piston Cup Trophy
Print Profile(1)
Description
This is the Piston Cup from Cars. This model is splitted, rotated for optimal printing and lowest amount of supports needed.
The rod and 2 wings need a little but of support, as shown in the picture below.
I recommend hand painting the supports onto the model and use Slim tree supports. If you have a bed slinger a brim is usually helpful.
The tallest part is ~ 152 mm. I printed this with 2 perimeters, 15 % infill and the model takes around 275 g of filament (total without flush).
Paint the piston in the according color or if you have a Bambu Printer, I included the .3mf for the project. I recommend using a Silk Gold Color. I used Bambu Lab Silk Gold: https://shrsl.com/4eafw (Aff. Link)
Assembly is pretty straight forward, parts should be glued together (e.g. super glue) but have a slight press fit connection.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (4)