Search models, users, collections, and posts
Fringe Sport Mag Pin Replacement Head (45mm)
IP Report
Print Profile(1)
0.2mm nozzle, 0.06mm layer, 4 walls, 15% infill
Designer
5 h
1 plate
Open in Bambu Studio
Boost
0
2
0
0
1
0
Released
Description
Direct head replacement for a Fringe Sport Magpin. This is the original size 45mm. (I have a smaller one at 35mm if you're running into clearance issues like on the REP Athena.) The 1" and 5/8" pins use the same size thread hole so it works for either. Since the thread pitch and knurling is pretty fine, you'll need a 0.2mm nozzle to print this. Also any text you'd want to add for flair would also benefit from the smaller nozzle size. I honestly hadn't tried 0.4mm nozzles so YMMV.
The text in the photo is NOT on the model by default. It was added in BambuSlicer as a play on words for magpin.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (0)