LIFE SIZE DRAGONBALL GOKU SSJ BLUE DISPLAY STATUE

• 
  
  ⚠️ IMPORTANT PRINT PROFILE NOTICE
• The main print profile included is for the DOWELS only 
• 👉 You will FIND TWO main print profiles for the statue / parts, both available directly in the STL / CAD section.
• Unfortunately, the full profiles could not be uploaded normally due to timeout limits caused by the extremely high detail and large number of parts. No files are missing — all model parts are fully included and ready to print.
• If needed, you can also import the STL set into Blender or your slicer to review part orientation and assembly before printing.
  Make sure you set Infill Supports And reorientate the parts for your liking 
   
  🔥 LIFE SIZE GOKU SSJ BLUE – A MASTERPIECE DISPLAY STATUE 🔥
  📏 Height: ~2000mm (2m / 6.5ft+)
  🧩 73 Parts | 🔩 Dowels Included | ⚙️ Fully Modular Build

Bring Dragon Ball power to full scale with this life-size Super Saiyan Blue Goku statue, captured mid-charge in an intense action stance with insane sculpted detail — from the sharp layered hair spikes and facial expression, to the cloth textures, muscle definition, and dynamic base.

This is a true collector-level centerpiece, engineered for large-format printing while still being segmented to work on standard printers.

🧩 Modular Breakdown (6 Main Build Sections)

✅ Base (1 section)

• Rocky terrain display base with strong footprint
• Designed for stability and weight support

✅ Legs / Lower Body (1 section)

• Dynamic pose with strong structural balance
• Clean cuts for easier seam hiding

✅ Torso + Head (1 section)

• High detail facial sculpt & iconic SSJ Blue hair
• Perfect for painting gradients and shading

✅ Arms (3 total)

• Arm Variant 1: With energy ball (Kamehameha-style effect)
• Arm Variant 2: Without energy ball (clean hand option)
• Arm Variant 3: Open-hand pose / alternate action arm

🔩 Dowel System (Precision Assembly)

Dowels included throughout the build for:
✅ perfect alignment
✅ strong joins
✅ easier gluing + positioning

Dry-fit before gluing for best results.

⚙️ Build-Plate Compatibility ✅

✅ All parts are cut to fit a 256 × 256 × 256mm build plate
Perfect for Bambu / K1 / Neptune / standard-size printers.

🖨️ H-Series Printer Compatibility ✅

✅ This model is also custom cut to fit the H Series Printers build volume:
📏 330 × 320 × 325mm

🔥 Perfect for the Bambu H Series printers
This allows for cleaner part splits, stronger joins, and faster overall printing.

✅ Mesh Repair (Always Included)

✅ Mesh Repair: Run auto-fix tools for non-manifold surfaces before slicing.
(Recommended in OrcaSlicer / Bambu Studio / PrusaSlicer mesh repair tools)

🎨 Finishing Notes (SSJ Blue Paint Guide)

💙 Hair: Deep blue base → lighter blue highlights → gloss accents for shine
👤 Skin: Warm peach shading with darker muscle washes
👕 Clothes: Matte finish recommended — dry-brush folds for realism
⚡ Energy Ball: Looks insane in clear filament or translucent resin (optional LED-ready)

🛠️ Assembly Notes

• Test-fit all dowels first
• Use epoxy or thick CA glue for main load-bearing joins
• Seam fill + sand for a seamless “statue-grade” finish
• Base can be weighted internally if desired for extra stability

⚙️ Print Recommendations

✅ Infill: 5–10% Gyroid
✅ Supports: Needed for arms + energy effect + hair edges
✅ Orientation:

• Torso/head upright for best face & hair detail
• Arms angled for minimal support scarring
• Base flat for maximum bed adhesion

💥 Result

A full-scale, museum-style Goku SSJ Blue statue — built for serious collectors and display rooms.

🧰 Helpful Tip (Blender / STL Assembly)

You can download Blender, then download the STL files from the cad.section and simply drag + drop all parts into Blender.
This will give you the full rendered model in parts, including part names, and you can also move parts around for planning/assembly.

✅ Hope this helps!
⚠️ And don’t forget to scale down the dowels by ~5% if they’re tight (printer tolerances vary).