Lovely Savings – A Little Heart for Big Love - Free 3D Print Model

Search models, users, collections, and posts

3d.tresd

Household>Decor

IP Report

Print Profile(1)

All

P1S

H2C

X1E

A1 mini

H2S

P1P

X1 Carbon

H2D Pro

P2S

H2D

X2D

A2L

0.16mm layer, 2 walls, 15% infill - with internal supports

Designer

9.1 h

2 plates

5.0(9)

Open in Bambu Studio

Boost

255

648

256

146

Released

Description

Boost Me (for free)

I design models for fun and I'm glad to share all of them with you. You can message me for request or ideas. Your support means a lot and help me running the new models development, boost me any time :)

Saving money can be cute ❤️

❤️ Pro tip: Print two! One for you and one for your partner, start saving for something together.

Lovely Savings is a heart-shaped money holder made for small surprises, sweet gestures, and future plans.

Perfect for Valentine’s Day, it turns a simple bill into a thoughtful gift that says “I’m saving this for us.”

Place it on a desk or bedside table and let it remind someone you love that even small things, when saved together, become something beautiful.

This design is ideal for romantic gifts, couple decor, and cute Valentine surprises, and it looks amazing in red, pink, white, silk or matte filaments.

If you like this model, please like, share and post your make — it helps others discover it ❤️

Perfect for

Couple savings
Future plans & dreams
Kids saving money
Gift money holder
Bedroom / desk decor

Printing recommendations

Supports are necessary internally, remove the with care not to damage the model
PLA / PETG / Silk
0.16 or 0.2 mm layer height, otherwise it will take too long
Works great in Matte, Silk or multicolor filaments

👉 If you like this model, please leave a like and share your make — it helps others discover it and keeps new designs coming ❤️

Boost Me (for free)

Tip my savings :)

Boost Me (for free)

You're always welcome to support me :)

Comment & Rating (17)

@user_1302665402

Boosted

Hi, thanks for that modell. 1. What can i do if this happens in the picture? Do i need to change a setting? 2. I scaled the lid to 98% and was able to close it without any problems. The normal lid did not screw on properly and was too tight. i have use the following settings - A1 standard settings 0,2 layer - PETG Best regards :)

The designer has replied

@3d.tresd

Hello, first of all thanks a lot for your support 🙏 The plug is already slightly reduced to fit, however I’ll give a look 👀 Regarding the print results it looks like an issue with the filament itself, don’t you have troubles with the same filament and other models? Which brand are you using and which speed and temperatures you use?

@user_1302665402

Boosted

Replying to @3d.tresd :

Thanks for your prompt answer. i am using jayo filament and with other models i dont have the problems, maybe i should use 0,16mm layer standard Bambulab a1 settings for speed and temperatures for 0,20mm layer standard

@3d.tresd

Replying to @user_1302665402 :

I don't think the layer height is the problem, more like the PETG extrusion temperature too low since the color is not glossy. I would try to increase the extrusion temperature to 270 or 275 celsius.

@fatihpektas

Print Profile

0.16mm layer, 2 walls, 15% infill - with internal supports

very beautiful

The profile uploader has replied

@3d.tresd

Thanks! I love it :)

(Edited)

@Mahina

Print Profile

0.16mm layer, 2 walls, 15% infill - with internal supports

stable and beautiful to look at

The profile uploader has replied

Show original

@3d.tresd

Thanks @Mahina! Let's fill it with a bunch of money :)

@Esculapio

Print Profile

0.16mm layer, 2 walls, 15% infill - with internal supports

Fantastic perfect print very successful

The profile uploader has replied

Show original

@3d.tresd

Thanks for the feedback :D

@Shunsharkey

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill - with internal supports

The profile uploader has replied

@3d.tresd

Thanks for the support <3

@user_81895523

Print Profile

0.16mm layer, 2 walls, 15% infill - with internal supports

@user_1186677875

Print Profile

0.16mm layer, 2 walls, 15% infill - with internal supports

@Hilbertzoer

Print Profile

0.16mm layer, 2 walls, 15% infill - with internal supports

@Jayallday6372

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill - with internal supports

@user_686380035

Print Profile

0.16mm layer, 2 walls, 15% infill - with internal supports

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Heart Vase - Love Vase

C3D

24.2 k

6.5 k

Little Lovely Hearts

jdormer9

2 k

632

Mini knitted heart

DrejkCZ

21.3 k

5.1 k

Mini hearts

Print Design

21.1 k

3.4 k