Spikey, the Double Action fidget clicker

Highly over-engineered Double Action fidget clicker.

Cock the top, spin it in your hand, and release with bottom cap for a POP.

or hold the top and bottom between your fingers and roll the main body.

or fidget with the twisting top and bottom caps.

And try your luck and print the spinning top cap :)

I have used Sunlu PLA and BambuLab PLA. 

However… 

Different brands, and even different colors in the same brand will behave different. Some of my prints have been stiff as rock for the first 200 clicks. But they will loosen up as you use them. And some other prints are perfect from the beginning… fell free scaling the TOP BUTTON-part to make the friction work with YOUR filament.

due to different preferences , i have a lot of different parts in the 3mf file. so that everyone can customize for their needs :)

I use the FLUSH BOTTOM BUTTON (blue) as a washer between the END CAP LONG SERATED and the SPRING…
like shown in one of the pictures, 

ONLY PLATE 2 AND 3 ARE OPTIMIZED AND READY TO PRINT!

PLATE 1 IS JUST A LAZY WAY OF INCLUDING ALL POSSIBLE PARTS FOR CUSTOMIZING!!

Enjoy