Car holder - TrueLife Nannycam
Print Profile(1)
Description
TrueLife NannyCam holder designed for in‑car use. When the baby is sleeping in the car in the driveway, it’s useful to monitor them with a camera. I power the camera using a 10 000 mAh powerbank.
The holder snaps onto the headrest rod. I measured rods in three different cars (Honda, Renault, Citroën) and all had a diameter of 12.6 mm, so the mount is designed primarily for this size. It can also clip onto a thicker rod (tested up to 20 mm), but not onto thinner ones.
For best results, I strongly recommend printing from carbon‑fiber‑ or glass‑fiber‑reinforced filament to prevent creep. Standard PLA works at first, but it will lose clamping force after a few months, especially in summer heat.
Do NOT leave it clipped in the car while driving. It may become dangerous in the event of an accident
Designed to 3 perimeter print with 0.4mm nozzle
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)