Jabber - Gachiakuta
Print Profile(1)
Description
Free for personal printing use only.
Exclusive projects and commercial license available at Patreon.com/StrataPrints — your support keeps new designs coming! Check out the Gris print below, available EXCLUSIVELY on Patreon!
Project: Jabber.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 187.86x235mm in size
You may print at higher layer heights below the Base Thickness of 1.04mm
The Max allowed Thickness is 3.2mm and the Actual Thickness is 3.2mm
#000000 PLA BambuLab Basic Black Transmission Distance: 0.6
#6f5034 PLA BambuLab Basic Cocoa Brown Transmission Distance: 0.4
#482960 PLA BambuLab Basic Indigo Purple Transmission Distance: 1.1
#bb3d43 PLA BambuLab Matte Dark Red Transmission Distance: 1.5
#9b9ea0 PLA BambuLab Matte Ash Gray Transmission Distance: 1.5
#e4bd68 PLA BambuLab Basic Gold Transmission Distance: 3
#5e43b7 PLA BambuLab Purple Transmission Distance: 5
#ffffff PLA BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 8 unique filaments
Swap Instructions:
Start with Black
At layer #15 (1.28mm) swap to Cocoa Brown
At layer #18 (1.52mm) swap to Indigo Purple
At layer #21 (1.76mm) swap to Dark Red
At layer #24 (2mm) swap to Ash Gray
At layer #26 (2.16mm) swap to Gold
At layer #29 (2.4mm) swap to Purple
Border Only Colors from here until the end.
At layer #37 (3.04mm) swap to Ivory White
This slider is set higher than the mesh depth. It is not affecting your final mesh. Consider removing it.
At layer #42 (3.44mm) swap to Black for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)