Gilderoy Lockhart - Free 3D Print Model

Search models, users, collections, and posts

LadyDi

Generative 3D Model>Hueforge & Lithophane

IP Report

Print Profile(1)

All

H2S

X1E

H2D

X1 Carbon

H2D Pro

P1S

P1P

A1 mini

H2C

P2S

X2D

A2L

0.08mm layer, 2 walls, 100% infill

Designer

3.3 h

1 plate

Open in Bambu Studio

Boost

Released

Description

boost for free , don't let your boost expire , boost to help me get filament

Gilderoy Lockhart

character from harry potter films/ books

Project: gilderoyY.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA BambuLab Basic Blue Gray Transmission Distance: 3
    PLA PolyLite Grey Transmission Distance: 1
    PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Blue Gray
    At layer #13 (1.12mm) swap to Grey
    At layer #20 (1.68mm) swap to White for the rest.

if you can spare the time please rate , like or follow or just collect