Search models, users, collections, and posts
TPU Deep Sleep Eye Mask
IP Report
Print Profile(2)
For dual-head machines like H2D, H2C; do not use this for A and P series
Designer
5.4 h
1 plate
0.2mm layer, 2 walls, 15% infill
Designer
4.7 h
1 plate
Open in Bambu Studio
Boost
24
51
3
0
24
5
Released
Bill of Materials
Bambu Filaments
Select all
Description
Content has been automatically translated.
I previously repeatedly tested the parameters of the TPU sponge state and finally adjusted the TPU to a certain level of comfort,
so I applied it to this wonderfully shaped eye mask
Entirely 3D printed with TPU, the body and sponge are fixed together with a card slot (glue may be needed), the back strap (2cm wide) needs to be self-provided, and it is recommended to use a strap with elastic velcro
The main body and sponge pad are printed with different densities and flow rates, along with 90A or softer TPU printing, to achieve a combination of soft and hard; you can download the 3mf to check the process parameters
For H2C, it is recommended to use PLA in the left nozzle as support material and TPU in the right nozzle as the main body of the eye mask; other models can use TPU directly for supports (slightly difficult to remove)
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3)