Print Profile(1)
Description
Description
For testing, I printed it at 10 cm. The supports are very delicate, but with extreme care and tweezers, they can be removed without damage, though they need to be removed one by one slowly.
PLA Basic white
0.16 extra fine
hybrid tree
10mm outer brim only
object spacing 0mm
If you want to collect them all… come here (the trap is already set)
https://makerworld.com/en/@Gara/upload
Technical Notes (the truth, not poetry)
I prefer to print them in a single color and paint them after priming, using acrylic markers.
The colored images serve as coloring examples, but then it's very much up to personal taste.
This design originated from an AI generation (Tripo) that I manually refined and tested on FDM prints to ensure printability and quality.
The "real" photos are the single-color ones (white).
When removing supports: use tweezers, be calm, and be delicate (no need to go Rambo on the support, or you'll regret it).
As always (the part that decides if you print or curse)
There is only one key: bed adhesion.
I use CryoGrip Pro Frostbite, and the adhesion is so good that the prints seem to have a mortgage on the bed: they never let go.
I mainly use Bambu filaments and have no issues.
If you have a different setup:
focus on adhesion (first of all)
use dry and quality filament
do things cleanly and you'll see that "mysteriously" everything works much better
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)