Sinuosity 1 - Abstract Wall Art
Print Profile(1)
Description
Boost Me (for free)
If you want to support me, I would be grateful
The series of beautiful geometric figures continues (check my profile for other models).
When hung, they appear to float, creating a 3D effect on a white or light background.
The image shows an example of abstract wall art, characterized by fluid and natural shapes.
Ideal for hanging on walls to add an artistic and modern touch to interior decor, such as living rooms, bedrooms, or offices.
Printed in black Bambu Lab PLA. Printing is very easy.
Colors can be changed from the slicer at the time of printing, the model can be enlarged or reduced as desired. Typically, 3 mm thickness is more than sufficient. So if you enlarge it on the x and y axes, keep the “Uniform Scale” function active, then to reduce the thickness, uncheck “Uniform Scale” and act only on the z-axis value which you will set to 2 or 3 mm.
It does not require an additional assembly process and can be hung with a single nail or double-sided tape.
A tip I always give is to first clean the print bed with dish soap and a sponge, rinsing with hot water, then drying it with compressed air, avoiding touching the surface with your hands. I also recommend performing the dynamic flow and flow rate calibrations provided in Bambu Studio. Personally, before printing, I dry the PLA with AMS 2 PRO for about 1 hour. It is these small measures, along with many others, that determine the success of a beautiful print.
Before leaving negative reviews, please adjust these parameters. If you have difficulties or continue to experience problems, do not hesitate to contact me, and we will look for solutions together in a perfect collaborative atmosphere. I have made several prints of this object and they all came out perfect as in the photos: if you have incorrect parameters, dirty or clogged nozzles, poorly calibrated machines, or wet or poor quality filaments, do not blame me.
PRINTING INSTRUCTIONS:
- Layer height 0.2 mm
- Initial layer height 0.2 mm
- Wall loops 2
- Top shell layers 5
- Bottom shell layers 3
- Infill 15%
- Infill pattern Grid
- No supports
- Outer wall speed 200 mm/s
- Inner wall speed 300 mm/s
- Normal print acceleration speed 10000 mm/s
- Outer wall acceleration speed 10000 mm/s
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (17)