ASUS TUF A14 Lap Cooling Pad

Simple full bottom cooling pad for the ASUS TUF A14 gaming laptop. Specifically designed for use on your lap so that the device is stable, and heat is kept well away from you lap.

Two Parts (how to join):

• The model is split into two parts that are connected with a series of triangular ‘dowels’. I recommend using a two part epoxy to secure the dowels  and thus both halves in place. I have found it to be quite solid!
• To most effectively epoxy I recommend mixing a small batch and inserting every dowel into one side of the print by dipping the tip of each dowel in the epoxy before inserting, this will pull the epoxy down into the hole without having too much excess (start on the middle ones where strength isn't as important and there is more space for overflow.
• once you have done this apply epoxy to the exposed tip of every dowel and maybe some in the crease between parts before sliding them together.

One Part:

• I have also provided a model with no split to print as a single part if your printer is large enough or you would like to model in your own split.

Note: Modelled of a 2025 Version of the laptop (ASUS TUF Gaming A14 FA401KH) so I cannot guarantee it will fit other. Though I believe the 2026 models are to use the same chassis.