Soldr.pro Solder Wire Clip (14mm)

🔧 Magnetic Solder Wire Clip Holder — Solder.Pro Compatible

If you carry solder wire with your Solder.Pro setup, this small clip makes life much easier.

This magnetic holder grips standard solder wire tubes (about 14 mm diameter) and lets you attach extra solder directly to your magnetic system. No more loose tubes rolling around in your bag or workbench — everything stays in place and within reach.

The clip uses the same 6×2 mm magnets as other Solder.Pro components, so it integrates seamlessly with your existing gear.

Also check my another model for desoldering wire: Desoldering Wire Clip

✅ Features

• Fits most common solder wire tubes (~14 mm)
• Uses standard Solder.Pro 6×2 mm magnets
• Strong hold without damaging the tube
• Compact and lightweight
• Fully modular — arrange and stack as needed
• Perfect for mobile kits, workshops, and field repairs

🧲 Magnet Setup

Recommended configuration:

• 2 magnets per clip
• 2 clips per solder wire tube

This gives a secure hold while keeping the system flexible.

🖨️ Printing Notes

• Material: PLA or PETG
• Layer height: 0.2 mm
• Infill: 20–30%
• Supports: Not required
• Orientation: Print flat for best strength

PETG is a good choice if the holder will see higher temperatures or heavy daily use.

❤️ If You Like This Model

If this clip is useful for your setup:

👉 Boost it
👉 Like it
👉 Print it and share your build

Your support helps me keep designing practical tools. Thanks!

If you'd like, I can also provide a shorter version optimized specifically for MakerWorld preview cards or mobile viewing.