3D-Druck Nienburg

cover

1000052785.png

plate_1.png

plate_2.png

plate_3.png

plate_4.png

Figuren.jpg

plate_1.webp

plate_2.webp

plate_3.webp

plate_4.webp

4 Plates, All parts - 0.16mm layer, 2 walls, 15% infill

Handle - 0.16mm layer, 2 walls, 15% infill

Guide - 0.16mm layer, 2 walls, 15% infill

Slider - 0.16mm layer, 2 walls, 15% infill

Clamping Ring - 0.16mm layer, 2 walls, 15% infill

Kirdae

WhatsApp Image 2024-04-21 at 17.49.51_baaa9406-a6c6-457e-895c-73fa4f51b0f8.webp

A1 mini, 0.16mm layer, 2 walls, 15% infill

suler

IMG_5748.png

Screenshot 2025-01-28 at 17.47.32.png

A1 mini profile for 0.2 mm nozzle.

0.2mm nozzle, 0.08mm layer, 4 walls, 15% infill

Dr_Squirrel

20250114_104820.jpg

20250114_183113.jpg

20250114_104829.jpg

20250114_104855.jpg

20250114_104850.jpg

20250114_104836.jpg

<ul><li>Prints on one plate</li><li>0.24 layer height for strength and speed of print</li><li>0.4 nozzle</li><li>I used PETG but you can use whatever filament you like</li><li>Prints per object, could be printed per layer instead and would then fit on a mini after auto arrange</li><li>Handle uses fuzzy skin exterior for better grip</li></ul><ol><li>Remove support material.</li><li>Slot two side parts onto bar with hole in. Side parts should face curves toward each other.</li><li>Place pin through hole in bar.</li><li>Put super glue into hole of handle.</li><li>Put pin with bar into hole of handle.</li><li>Once cured, sling elastic around the outside if you have a larger band, hook onto hook arms if shorter.</li></ol>

Single Plate, Print per Object, Fuzzy skin

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

This miniature holder is used for painting small figures without having to constantly put them down or touch the figure.&nbsp;<figure class="image"><a href="https://buymeacoffee.com/3ddrucknienburg" target="_blank" rel="nofollow noopener ugc"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000227872/design/2024-07-02_86e83642472c6.png"></a></figure>&nbsp;The Schieber.3mf file is needed twice!&nbsp;The slider has hooks on two sides, each of which is connected to the opposite slider with a rubber band. This will clamp the miniature in place.Have fun with it!

Holder for miniatures - Miniaturenhalter

ASIA

Print Profile(8)

Description

Comment & Rating (131)

License

Related Models