Spock portrait - hueforge

One for the sci fi trekky fans! 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
IF YOU WISH TO SCALE PLEASE DO NOT CHANGE Z HEIGHT

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.32mm and the Actual Thickness is 2.24mm

    #000000 PLA Sunlu + 2.0 Black  Transmission Distance: 0.1
    #5b6579 PLA BambuLab Basic Blue Gray  Transmission Distance: 2.2
    #8e9089 PLA BambuLab Basic Gray  Transmission Distance: 0.2
    #ffffff PLA Sunlu + 2.0 White  Transmission Distance: 6.8
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Blue Gray
    At layer #13 (1.12mm) swap to Gray
    At layer #20 (1.68mm) swap to White for the rest.