Tip-Replacement for Nauticam Hand Pump
Print Profile(1)
Description
Is the connector of your Nauticam hand pump defective? You don’t necessarily have to replace the entire pump. My 3D file replaces the tip and your vacuum pump will work again. Tested on both the old and the new Nauticam vacuum valve. I printed my connector using TPU95 from Polymaker; TPU90 should work as well. Unfortunately, TPU for AMS from Bambu Lab is too hard and not suitable.
The defective connector can be easily removed with a knife. Glue the printed part in place using a suitable adhesive.
___________________________
Is the connector of your Nauticam hand pump defective? You don't necessarily have to replace the entire pump. My 3D file replaces the tip and your vacuum pump will work again. Tested on both the old and new Nauticam vacuum valve. I printed my connector with TPU95 from Polymaker; TPU90 should also work. TPU for AMS from Bambu Lab is unfortunately too hard and not suitable. The defective
connector can be easily removed with a knife. Glue the printed part with a suitable adhesive.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)