Diamond Quilt Lights - MOOX

How to play with print settings: 

Important note: I forgot to mention that increasing the layer height makes layer lines more visible, which some people may not prefer. A 0.6 mm nozzle with around 0.2 mm layer height is a good balanced choice. However, depending on the design—like the Fluted Flow, Canopy, and Torsion collections—you can go higher (e.g., 0.24 mm). Don’t be afraid to experiment with the settings.

For filament selection, please refer to the PDF. : https://drive.google.com/drive/folders/1IaSxpI7RySeYucwzo67HW4V7sIvSvKYj?usp=sharing

If you prefer not to check the PDF, here is a quick summary:

All lamp shades have a 0.8 mm wall thickness, regardless of whether you use PLA or PETG. White filaments generally work best for lamp shades. We do not recommend a specific color or filament, but here are our favorite options:

• Bambu Lab PLA Matte Bone White (11103)
• Bambu Lab PLA Matte Ivory White (11100)
• Bambu Lab PLA Basic Gold (10401)
• Bambu Lab PLA Basic Pumpkin Orange (10301)

Translucent Pendant Lights:

You can also use heat-insert nuts:
1/4"-8×8 brass knurled heat-insert nuts
Link: https://eu.store.bambulab.com/it/products/1-4-8x8-brass-knurled-heat-insert-nut-10pcs

And camera screws:
1/4"-12×15 camera screws
Link: https://eu.store.bambulab.com/it/products/1-4-12x15-camera-screw-3pcs-fc014

These can add a bit more solidity to the product, although they are optional and not required.