Jananese karakuri bako 1 9steps

Thanks to 2222pzzls!

This puzzle is based on 2222pzzls's Himitsu Bako Mini puzzle, with four additional steps added.

The pattern is made using the hemp leaf pattern, so there's no need to worry about the initial layer peeling off.

This is my first model, so these instructions are based on 2222pzzls's.

3Dプリント Himitsu Bako MINI | 5ステップ XXS 日本の組木細工 - 無料3Dモデル -MakerWorld

This tiny puzzle box is just 52 x 40 x 28mm and contains 9 steps. No extra parts or glue required! It prints in just 2 hours and supports are easy to remove.

Compatibility & Information

• No Additional Parts Required!
• No Adhesives Required!
• External Dimensions
  • 52 x 40 x 28mm
• Internal Dimensions
  • 20 x 14 x 20mm

Printing Instructions

• Choose standard or loose fit
• Loose fit is recommended for reduced prints (50% or less).
  • Note: Tolerances vary widely depending on the type and brand of filament and your printer.
  • Even with standard tolerances, the front and back plates may be stiff. Polishing is recommended.
• Just press print!

Assembly Instructions

• Please assemble this model according to the assembly instructions included with the model.
• No glue or additional parts are required!

Note: The thumbnail photo uses an AI-generated background. Please see other photos for print quality.

Thank you for downloading my model.

I would be grateful if someone could create a profile for multicolor printing.⇒I created.

It has been released - Japanese karakuri bako 2 17 steps.