Enclosure for LCD2004 with ESP32
Print Profile(1)
Description
You can find the newer, reworked and much more compact version here:
https://makerworld.com/en/models/2904213-new-enclosure-for-lcd2004-with-esp32#profileId-3247029
This model is very much based on another model but scaled up to fit a bigger LCD2004 screen. Here you can find 2 versions, one is for ESP32 SuperMini (without pins, since usually you get those without pre soldered pins) and other one is for full ESP32 but you need to mount it upside down (since those usually comes with pre soldered pins so this way it's easier to mount). The only difference between those 2 versions is the hole for USB-C for SuperMini version is slightly lower than on the full ESP32 version. Both ESP32 are intended to be mounted with double sided tape, preferably 1mm thick.
You'll need 4 M2.5x5.0 screws to mount screen to the panel.
This remix is based on
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (6)