AK Rifle Prop Toy Gun | Functional model - Free 3D Print Model

Search models, users, collections, and posts

stefano353

Props & Cosplays>Cosplay Weapons

IP Report

GIF

Print Profile(1)

All

P1S

X1 Carbon

P2S

H2D

H2C

X1E

P1P

H2S

H2D Pro

X2D

A2L

0.16mm layer, 2 walls, 15% infill

Designer

69.9 h

16 plates

5.0(2)

Open in Bambu Studio

Boost

446

1089

541

Released

Bill of Materials

List other parts

300mm spring x 1: For Recoil spring. Diameter 10mm
Pen spring x 1: For extractor. Diameter 5mm
20mm spring x 1: For folding stock. Diameter 10mm
Rubber band x 1: For hammer and trigger

Description

This is not a fully tested model, the gas tube may not fit and may require sanding. Please send feedback about the model in the comments.

This is a functional model of an AK, with a working magazine and shell ejection.

It is not a replica of a specific model. Assembly is accurate to a real AK, with some changes to some parts to strengthen the model.

Features:
-Rubber band trigger and hammer
-Working extractor and ejector
-Detachable magazine
-Folding stock

Additional parts needed;
-10mm diameter 300mm spring (main spring)
-10mm diameter 20mm spring (folding stock)
-Pen spring (Extractor and Disconector)
- Rubber Band (Trigger and Hammer)

Changelogs:

13.02.2026 - Added raw STL files, simplified handguard for easier printing and fixed the magazine so it wouldn't collide with the bolt carrier.

Comment & Rating (12)

@ghosr

two questions. one is it full auto, two can it shoot airsoft rounds

The designer has replied

@stefano353

This is only a shell ejecting model, the selector only disengage the disconnector for the trigger.

@ghosr

Replying to @stefano353 :

ok thank you

@user_2752040526

are there assembly instructions

Show original

@user_3273892215

Because you'll probably be using parts from a real AK-47, you can probably just use a video on how to assemble a real AK-47.

@user_1348397932

do i need a spring for the magazine remover?

The designer has replied

@stefano353

The friction of the magazine catch should hold the magazine in place. However you ideally should use a torsion spring, any other spring could also work if you glue it in place.