joker

boost for free , don't let your boost expire , boost to help me get filament

batman film villian 

the joker , this is an abstract picture made up basically with words and turned into a hue forge 

please note the last pictrure is of the print when increased in size to 120% x120% x100%, the ,so the writing is clearer and much more defined, so i recommend printing as large as your printer allows 

Project: joker .hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA BambuLab Basic Blue Gray Transmission Distance: 3
    PLA PolyLite Grey Transmission Distance: 1
    PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Blue Gray
    At layer #13 (1.12mm) swap to Grey
    At layer #20 (1.68mm) swap to White for the rest.

if you can spare the time please rate , like or follow or just collect