Flask boot in different sizes
Print Profile(1)
Description
- Flask boot created for Hydro Flask Trail Series 32 oz / 946 ml (see picture)
- Lightweight (only 11.3 gr for 80mm version)
- Grip pattern
- Air hole
- Boot height 25mm
- Different sizes in the print profile; 70mm, 71.5mm, 73mm, 80mm, 90mm
Scale according to your needs in Bambu Studio if you need other sizes. The diameter is measured inside (hole).
Should work on flasks/bottles/tumblers from different brands. I have tested the following with success:
90mm
- Hydro Flask 40 oz / 1180 ml
80mm
- Hydro Flask Trail Series 32 oz / 946 ml
71.5mm
- Hydro Flask 24 oz / 710 ml
- Hydro Flask 21 oz / 621 ml
- Hydro Flask 18 oz / 532 ml
- Hydro Flask 12 oz / 354 ml (mug)
For this print I have used TPU 95A. “Auto circle contour - hole compensation” is turned on in the print profile to keep the inside diameter on the printed object as close to the 3D model as possible. I recommend to “print by object” if you are printing more than one object per plate.
Boost Me (for free)
If you like it, please consider to give me a boost. Thanks!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)