oec/oect modified for dual-bay Macintosh NAS

Open Source License Commercial Use Must Read

By default, commercial use is not allowed, but the open-source license has additional clauses for partial commercial use!

To maintain a sustainable open-source environment, please adhere to the following license when using this design: Open Source License (for appearance and structural design only):

1. When publishing modified works and physical products (including printing services, finished product modifications, finished product sales, etc.), the author 【Bilibili @方阿成】 must be clearly credited

2. This physical product may only be sold by individuals with clear attribution to the author 【Bilibili @方阿成】, and may not be used for other commercial purposes

(Profit-making activities such as mass production and sales under the name of a company, studio, or other legal entity are not permitted)

3. Under no circumstances shall the author be held liable for any losses incurred by anyone due to the use of this design (including motherboard damage during installation, fire due to improper installation, personal safety and property damage, and all other related and unrelated consequential issues)

Modified File Parts List

Materials Preparation (Recommended merchant platforms have no interest ties; you can choose other merchants with the same model)

1. Easy Drive Cable Purchase from designated platform to avoid different motherboard styles Choose dual USB [3.0] with power port (seller does not guarantee future supplier changes)

2. 5010 fan 1.9 yuan each It is recommended to buy both 5v and 12v (you can decide which one to use after actual testing, it's not expensive anyway)

3. 12V to 5V power supply

3. Power supply 12V5A Recommended major brands (e.g. Dajing, Gangqi)

4. [Additional DIY modification requirement] Fan speed controller (can be purchased according to your needs. Currently, there is no designated installation space. It can be placed freely at the bottom)

5. Self-tapping screws m2*8 20 pcs m2*12 4 pcs m2*10 4 pcs

More file updateshttps://my.feishu.cn/wiki/DFJ2wOSwYiVRfYkCg8rcOCuanXb?from=from_copylink

Important Note: Please place according to the slicer software presets; do not change the placement method arbitrarily. Otherwise, you will have an excessive amount of supports. (The main body must be laid flat; other placement methods cannot print perfectly)

Recommended H P series models

The main body is printed with PLA The hard drive bracket is PETG

If you print the main body with PETG, you need to change the support method to the default option, otherwise it will be difficult to remove