Custom Funko Pop (Engineering Manager)

Here is a 3D model and print of a custom funko-pop I did recently. I used Chat GPT to generate an image of my boss and his usual attire then dropped it into the Bambu's image to 3D and here we are. The 3mf I have uploaded is a 2-inch-tall version that is two pieces with a pin connector. I used a 4.25 mm hole to pair with a pen spring and create a small bobble head. I have done a 3 inch and 6-inch version but user beware if you scale to a 6-inch model, I had issues with smash and warping so you MUST use standard supports rather than tree to hold everything where it needs to be. Feel free to manipulate or use PLA support for your interface. 

This 2-inch version should print great as uploaded. I did make a copy with 4 colors but the print time increases exponentially. It is easier to print single color and take a bit of time to paint with some acrylic paint to the colors your heart desires.