Volvo EX90 Rear Dash Cam Mount

Update: 03/09/2025 Added camera house that works with the Wolfbox rear camera mount.

Update: 02/15/2025 Added camera clip that works with the Wolfbox rear camera.

Update: 01/27/2025 Reduced house height by 5mm and added ridges to help lock it into place.

I originally mounted my rear dash cam (VIOFO A229) to the lift gate but the wire would hang down when the lift gate was closed and was a huge distraction.  This mount attaches to the roofing and has just enough drop so that dash cam clears the lift gate.  The wire can get tucked right into the roofing as well.  Much less distracting!  There's also an optional housing model that fits over this mount to hide the camera and wire entirely.  I would recommend printing in a color similar to your interior.

Print the mount on the right side of the model, opposite the cable channel so that no supports are needed.  Recommended PETG at 0.2 resolution.  I used 3 walls and 40% infill to give it a little more heft.  The housing should be printed on the Volvo logo, no supports!