Seahawks Layered Logo- Wall Art, Magnet & Keychain - Free 3D Print Model

Search models, users, collections, and posts

Jessie 3D Prints

Art>Signs & Logos

IP Report

Print Profile(1)

All

P1S

X1E

X1 Carbon

H2S

H2D Pro

H2D

P2S

P1P

H2C

X2D

A2L

0.2mm layer, 2 walls, 10% infill

Designer

1.6 h

3 plates

5.0(2)

Open in Bambu Studio

Boost

Released

Description

Welcome to my layered logo project! I will be working through all NFL logos. If you don't see a logo on my profile, please feel free to request it and I'll prioritize it next.

I created these logos in a layered art style so that it has depth and can be printed without AMS.

The file includes 3 different sizes

Wall Art: A large centerpiece for your desk or wall.
Magnet: Includes a pre-embedded 8.2mm slot on the back—perfectly fits standard 8mm x 2mm round magnets (just glue it in!).
Keychain: Features a reinforced loop for standard jump rings.

You can resize the X and Y dimensions, but do not adjust the Z-height (thickness). The color swaps are calculated by layer height, so changing the Z-value will mess up the colors.

Comment & Rating (10)

@Cosmo_25.

I figured it out. It didn't have pauses set for the color changes and I thought it did. So the model was done printing when I thought it was just stopping for a color change. So it was basically trying to print another one on top of the first one. Silly me! Printed the magnet version as a test and it came out great! Go Hawks!!!

The designer has replied

@Jessie3DPrints

woohoo! glad it worked out. thank you for sharing, looks great! good luck sunday!

@Cosmo_25.

Replying to @Jessie3DPrints :

WE BE THE CHAMPS!!!

@Jessie3DPrints

Replying to @Cosmo_25. :

congrats!

@Cosmo_25.

When the color switched to gray - this is what happened. Any ideas?

The designer has replied

@Jessie3DPrints

That's odd. Any chance you're using the white support for PLA that sometimes comes with the printers from Bambu Lab? It looks like the gray layer isn't sticking.

@Cosmo_25.

Replying to @Jessie3DPrints :

No, I'm using basic white PLA. I'm going to try it again this morning. I'll let you know.

@Mads_and_BBo

Print Profile

0.2mm layer, 2 walls, 10% infill

This was great! Thanks for sharing. I adjusted the size slightly and also the made the spots for the magnets a little deeper for 2 to 3mm. Printed two versions to share with friends right before the hawks won the superbowl! whoop, whoop! (No AMS with 3 pauses adjusted to new thickness to accommodate deeper magnets)